Lukas at Deszynski dot com Solar Home Monitor.
0 W
0 A
0 V
0 W
0 A
0 W
0 W
0 W
Target V:
Inv1 Data from:
Tristar Data from:
BMV Data from:
Output Prio:
Back to Grid:
Back to Batt:
Mode:
to Grid SOC (bmv):
to Batt SOC (bmv):
smartMe Meter
L1:
L2:
L3:
kWh:
Date:
Variable Value
Morningstar LiveView Morningstar DataLog
Charge State ".$tristar_registers_values['Charge State']."
LED State ".$tristar_registers_values['LED State']."
Kilowatt Hours ".$tristar_registers_values['Kilowatt Hours']." kWh
Amp Hours ".$tristar_registers_values['Amp Hours']." Ah
Batt Target Voltage ".$tristar_registers_values['Target Voltage']." V
Today Watt Hours ".$tristar_registers_values['Today Watt Hours']." Wh
Today Max. Output Power Watts ".$tristar_registers_values['Today Max. Output Power Watts']." W
Today Absorption ".$tristar_registers_values['Today Absorption']." sec
Today Float ".$tristar_registers_values['Today Float']." sec
Daily_Faults ".$tristar_registers_values['Daily_Faults']."
Daily_Alarms_hi ".$tristar_registers_values['Daily_Alarms_hi']."
Daily_Alarms_lo ".$tristar_registers_values['Daily_Alarms_lo']."
flags_daily ".$tristar_registers_values['flags_daily']."
Sweep Vmp ".$tristar_registers_values['Sweep Vmp']." V
Sweep Voc ".$tristar_registers_values['Sweep Voc']." V
Sweep Pmax ".$tristar_registers_values['Sweep Pmax']." W
----> Daily Logs / Charts <----
Variable Value
Variable Value
Inverter Conversol 5k
AC_IN_V n.d.
AC_IN_HZ n.d.
AC_OUT_V n.d.
AC_OUT_HZ n.d.
AC_OUT_VA n.d.
AC_OUT_W n.d.
AC_OUT_LOAD_PERCENT n.d.
BUS_V n.d.
BATT_V n.d.
BATT_CHRG n.d.
BATT_CAPACITY_PERCENT n.d.
HEATSINK_TEMP n.d.
PV_I_BATT n.d.
PV_V n.d.
BATT_V_SCC n.d.
BATT_DISCHRG_I n.d.
Device Status n.d.
Device Mode n.d.